Cut through hard plates with ease!
The Metal Cutting Double Head can be attached to the common electric drill to make arbitrary and accurate cuttings on metal plates. With this, you'll be able to cut through hard surfaces like butter, split the plate or make special designs whichever way you like!
To use this product, all you need to do is to attach it onto a drill and you're set. You can use this product for several purposes such as making decorations with hard surfaces, trimming the surface sides, and etc. You will be able to perform more accurate cuts with this product than if you do it any other way, as you can freely aim it wherever you want.
- There is two cutter head that can be adjusted to cut.
- The tool head can be positioned 360 degrees in any direction.
- Equipped with an 8mm electric or pneumatic drill, rotating speed is 1500-3000 RPM
- The minimum cutting radius is 12mm.
- Allowable cutting thickness: ordinary iron plate: 1.8mm; stainless steel plate: 1.2mm; copper, the aluminum board: 2mm; plastic plywood car: 2mm.
1 x Metal Cutting Double Head
1. Due to different monitor and light effect, there might be a slight difference in color between the actual item and item shown in the pictures.
2. There might be a minor deviation in the length due to manual measurement.